Tyredog 4 Wheel Tyre Wireless Pressure Monitor (Trailer Only) $349
Click here to read the owners manual
he TYREDOG™ TD-1400A-X4 Tyre Pressure and Temperature Monitor can support (4) tyres and can be easily installed with ease and within minutes.
The User Friendly Graphic Interface (LCD monitor), allows the user to monitor and understand the status of their tyres thus ensuring they are always well maintained. Correct tyre pressure ensures fuel efficiency, reduces tyre wear, the risk of aquaplaning and lack of traction. Normally all the necessary check-ups cost time, effort and money.
How it works
- The Wireless Sensors are fitted to the wheels valve stem. Simply replace the valve cap with a Wireless Sensor and fit the supplied SecureFit ring to ensure the sensor is securely fastened. This SecureFit ring can also act as a theft deterrent.
- Once the Sensors are fitted and the monitor/receiver is turned on using the supplied DC cable (Cigarette lighter plug), within a couple of minutes or once the wheels rotate, the latest Pressure and Temperature information will be updated on the monitor/receiver.
- The sensors will then transmit any changes in pressure or temperature. If the Pressure falls or raises above the user preset levels, the unit will sound to alert the driver. There is also a visual indication on the Monitor / Receiver unit.
General Features
- Small and Compact.
- Vehicles Battery Voltage is shown in display.
- Monitors up to 4 tyres.
- Simply Screw on to the Valve stem and lock in place
- Audible / Visual Alerts when tyre pressure drops below / raises above user set level
- Measure Pressure in PSI, KPA, BAR or KgCM
- Alerts when tyre temperature raises above the user set level. (Adjustments per axle and Spare)
- Monitoring tyre pressure anytime
- Expands tyre lifespan & Saves fuel consumption
- Detects leakage before harm is done
- Easy to install
- High accuracy
- Not affected by bumpy roads
- Operates even when the car is stationary
- Detects both under inflation and over inflation of tyre
Tyredog 4 Wheel Tyre Wireless Pressure Monitor (Trailer & can be expanded to monitor the car as well) $349
Click here to read the owners manual
The TYREDOG™ TD-2300A-X Series Tyre Pressure and Temperature Monitor kits support 4 to 34 tyres, monitors up to 180 PSI.
The User Friendly Graphic Interface (LCD monitor), allows the user to monitor and understand the status of their tyres thus ensuring they are always well maintained. Correct tyre pressure ensures fuel efficiency, reduces tyre wear, the risk of aquaplaning and lack of traction. Normally all the necessary check-ups cost time, effort and money.
How it works
- The Wireless Sensors are fitted to the wheels valve stem. Simply replace the valve cap with a Wireless Sensor and fit the supplied SecureFit ring to ensure the sensor is securely fastened. This SecureFit ring can also act as a theft deterrent.
- The Relay / repeater system must be mounted underneath the vehicle. This can be powered up by 4 x AA Batteries or you can hard-wire to a 12V/24V Power Source.
- Once the Sensors and Relay are fitted and the monitor/receiver is turned on (Powered by 12/24V Cigarette Lighter Adaptor), within a couple of minutes or once the wheels rotate, the latest Pressure and Temperature information will be updated on the monitor/receiver.
General Features
- Ability to Monitor 4-34 tyres
- Main Kit can support up to 10 Sensors
- Simply Screw on to the Valve stem and lock in place
- Audible / Visual Alerts when tyre pressure drops below / raises above user set level
- Measure Pressure in PSI, KPA, BAR or KgCM
- Alerts when tyre temperature raises above the user set level
- Relay / Repeater Module for extended Range and greater accuracy
- Monitoring tyre pressure anytime
- Low Battery Indicator on the display for Sensors and Relay
- Expands tyre lifespan
- Saves fuel consumption & Improves safety
- Detects leakage before harm is done
- Easy to install
- Not affected by bumpy roads
- Detects both under inflation and over inflation of tyre
