Description

The TYREDOG™ TD-2300A-X Series Tyre Pressure and Temperature Monitor kits support 4 to 34 tyres, monitors up to 180 PSI. The User Friendly Graphic Interface (LCD monitor), allows the user to monitor and understand the status of their tyres thus ensuring they are always well maintained. Correct tyre pressure ensures fuel efficiency, reduces tyre wear, the risk of aquaplaning and lack of traction. Normally all the necessary check-ups cost time, effort and money.

How it works

  • The Wireless Sensors are fitted to the wheels valve stem. Simply replace the valve cap with a Wireless Sensor and fit the supplied SecureFit ring to ensure the sensor is securely fastened. This SecureFit ring can also act as a theft deterrent.
  • The Relay / repeater system must be mounted underneath the vehicle. This can be powered up by 4 x AA Batteries or you can hard-wire to a 12V/24V Power Source.
  • Once the Sensors and Relay are fitted and the monitor/receiver is turned on (Powered by 12/24V Cigarette Lighter Adaptor), within a couple of minutes or once the wheels rotate, the latest Pressure and Temperature information will be updated on the monitor/receiver.

General Features

  •  Ability to Monitor 4-34 tyres
  •  Main Kit can support up to 10 Sensors
  • Simply Screw on to the Valve stem and lock in place
  • Audible / Visual Alerts when tyre pressure drops below / raises above user set level
  • Measure Pressure in PSI, KPA, BAR or KgCM
  • Alerts when tyre temperature raises above the user set level
  •  Relay / Repeater Module for extended Range and greater accuracy
  •  Monitoring tyre pressure anytime
  • Low Battery Indicator on the display for Sensors and Relay
  •  Expands tyre lifespan
  • Saves fuel consumption & Improves safety
  • Detects leakage before harm is done
  • Easy to install
  • Not affected by bumpy roads
  • Detects both under inflation and over inflation of tyre

What’s included

  • 1 x Monitor / Receiver
  • 4 x Wireless Sensors (inc 4 x CR1632 Batteries)
  • 4 x SecureFit Rings
  • 1 x Suction Cap Mounting Bracket
  • 1 x Cigarette Lighter Power Adaptor
  • 1 x Relay / Repeater unit (inc 4 x AA Batteries, Power Cable and Mounting Hardware)
  • Owners Manual